Homes. Shops. Jobs done right.
Residential and commercial spray foam insulation, new installs and correction work for jobs other crews got wrong — all under one roof. Built for St. George, Utah's real hot-desert climate at 2,860 feet, IECC Climate Zone 3B, serving St. George, Washington City, Hurricane, Santa Clara, and Ivins.
A cooler property, lower energy bills
Tell us about your project — a hot upstairs by 4pm, a metal shop that sweats in the morning, a job another crew left unfinished — and we'll build a clear, no-pressure quote.
- Residential and commercial scopes
- Air-seal and insulate in one visit
- We correct other contractors' bad foam jobs
One spray foam company for the whole job — not just the easy part.
St. George sits at roughly 2,860 feet in the Utah desert, in IECC Climate Zone 3B — a genuine hot-desert climate with July highs of 104-106°F and August close behind, followed by a monsoon season that runs mid/late-July through early/mid- September. This is a cooling-load problem, not a heating one, and it applies just as much to a metal shop as it does to a three-bedroom house.
Most spray foam crews in Washington County pick a lane — residential attics only, or commercial metal buildings only — and refer out anything else. We run both, plus the work most companies won't touch: removing and correcting spray foam a previous contractor installed wrong. Off-ratio mix, missing ignition barriers, and incomplete cavity fills don't fix themselves, and they don't pass inspection either.
Whatever brought you here — a hot attic, a sweating metal roof, or a job that needs to be redone right — we quote it the same way: a real site visit, an itemized number, and a crew that installs spray foam every single day.
Complete spray foam insulation for homes, shops & commercial buildings
From attic and roof-deck applications to metal-building condensation control and correcting a previous contractor's mistakes — click any service to see how it works, what it costs, and why it fits Washington County's desert climate.
Residential and commercial, one crew standard
The same install discipline whether we're in a family attic or a 6,000 sq ft metal shop — no B-team for commercial work.
We fix what other crews got wrong
Off-ratio foam, missed ignition barriers, incomplete fills — we diagnose, remove what has to go, and reinstall to code.
Zone 3B-appropriate, every time
We build to St. George's actual cooling-driven climate targets, not a generic statewide minimum or cold-climate assumption.
Comfort and savings, built for Washington County summers.
Full-service scope
Attics, walls, crawl spaces, garages, shops, and metal buildings — spray foam is the only material we install, across every scope it applies to.
Zone 3B-appropriate R-values
We build to St. George's actual code targets for a hot-desert climate — not a generic statewide minimum or a cold-climate assumption that doesn't apply here.
Honest, right-sized advice
We recommend open-cell, closed-cell, or a mix based on your property's actual needs — and we won't oversell heating-bill or ice-dam framing that has nothing to do with a St. George summer.
Proudly serving St. George & Washington County
Local crews across St. George and the surrounding communities — residential and commercial — we know these buildings and this desert climate.
From free assessment to a cooler, more efficient property
Free assessment
We evaluate your home or building, talk through goals and budget, and give you a clear, itemized quote — including correction work if a prior job needs it.
Prep the space
We prep the area, mask surfaces, and stage equipment — old or failed insulation removed first when needed.
Spray-apply foam
Open-cell or closed-cell foam is sprayed to your Zone 3B R-value target, sealing every gap, residential or commercial.
Inspect & verify
We inspect the finished application, confirm coverage and cure, and walk you through what to expect this summer.
St. George spray foam insulation FAQs
Yes — that's the core of how we're built. Most spray foam crews in Washington County focus on residential attics and walls and pass on commercial work, or they focus on commercial metal buildings and don't do homes. We run both sides of the business every week: single-family attics and crawl spaces on one truck, metal-building and shop condensation-control jobs on another. If it takes spray foam to solve, we quote it.
Yes, and it's a bigger share of our work than most homeowners expect. Off-ratio foam, incomplete cavity fills, missing ignition barriers, and foam sprayed too thick in one pass are common failure points from crews that don't specialize. We assess what's there, remove what has to come out, and reinstall correctly — see our Spray Foam Removal & Correction service for what that process actually involves.
For most homes, yes — particularly when the attic and roof deck are the target. Those two months are when Washington County's cooling load peaks, and a sealed, foam-insulated attic assembly means your AC system spends less time fighting radiant heat gain from a 130-150°F+ roof deck. Rocky Mountain Power customers may also qualify for Wattsmart Homes program incentives that help offset the upfront project cost.
Most residential projects run roughly $1.50 to $5.00 per square foot installed, with open-cell foam toward the lower end and closed-cell toward the higher end because of its denser chemistry and higher R-value per inch. Commercial and metal-building projects are priced by scope and square footage after a site walk. Because Washington County's climate is entirely cooling-driven, none of the cost drivers you'd see in a cold-climate market — ice-dam prevention, snow-load venting changes — apply here. We'll walk your specific property and give you a firm, itemized quote.
Get your free spray foam quote
Tell us about your home and we'll put together a clear, no-pressure spray foam insulation quote — built for St. George's real summers.